606
本品系采用優質的水性乳液、增粘樹脂、多種助劑，經過嚴格的科學配方和先進的生產工藝精心制作而成的一種高性能粘膠。
1、外觀：乳白色粘稠狀液體
2、適用范圍：
本品適宜于各種牛皮箱的粘接、銅卡紙對裱。
3、產品特性：
（1）涂刷性能好，全粘時間十分鐘，四小時完全固化。
（2）膠膜柔韌，各種牛皮箱粘接性能好。
（3）本品抗冷耐熱性能佳，粘合好的產品在60℃烘烤72小時或-20℃冷凍72小時粘接強度保持不變，產品不爆，膠膜不發脆。
4、施工方法：手刷、機糊通用
5、技術參數：
（1）固含量≥50%
（2）粘度=5000-6000mpa.s
（3）pH=5-6
6、使用注意事項：
（1）對于挺度太大的產品，粘合后要求至少壓榨半小時，并且壓力要足夠，使兩被粘面能夠充分貼合。
（2）使用本品的產品質量涉及諸多因素，用戶應在使用前視產品的具體情況進行試用，合格后方可批量生產。
7、貯存運輸：
（1）本品應密封存放于陰涼干燥通風處，貯存溫度為5-35℃為宜，有效貯存期為一年，超過貯存期如檢驗合格仍可使用。
（2）本品為水分散體，屬于非危險品，可按普通物品辦理運輸。
免責條款
由于貨品的使用、操作、貯存以及運輸?shù)染皇鼙竟静倏兀竟緦ω浧返氖褂眯阅堋⑿Ч斑m用性均不負責。本公司的任何職員或代表均無權改動或放棄本條款，如貴公司未能接受此項免責條款，請將貨品原裝退回。
This product uses the high quality water-based emulsion, viscosity resin, a variety of additives, through rigorous scientific formula and advanced production process carefully made of a high-performance adhesive.
1, Appearance: milky white viscous liquid
2, Scope:
This product is suitable for a variety of Kraft adhesive, copper jam on the mounted.
3, the product features:
(1) brushing good performance, the whole stick time ten minutes, four hours to fully cure.
(2) film flexibility, a good variety of Kraft adhesive properties.
(3) The product good heat resistance, cold resistance, adhesion good product baking 72 hours or frozen at -20 ℃ 60 ℃ 72 Hour
bonding strength remains the same, the product is not explosive, film is not brittle.
4, the construction method: Hand brush, paste Universal machine
5, the technical parameters:
(1) Solid content ≥50%
(2) Viscosity = 5000-6000mpa.s
(3) pH = 5-6
6 Caution:
(1) the product is too large for the stiffness, the press after bonding requires at least half an hour, and the pressure should be sufficient so that the two surfaces to be glued can be sufficiently bonded.
(2) the FDA product quality involves many factors, you should use depending on the product prior to the specific circumstances of the trial conducted before mass production after passing.
7, storage and transportation:
(1) This product should be sealed in a cool dry place, storage temperature is 5-35 ℃
is appropriate, effective storage for one year, over the storage period can still be used as passing inspection.
(2) This product is an aqueous dispersion, a non-dangerous goods, according to general goods for transportation.
Disclaimer:
The company is not responsible for the
performance, effect and applicability of the goods due to the use, operation,
storage and transportation of the goods.No staff or representative of the
company has the right to amend or waive this clause. If your company fails to
accept the exemption clause, please return the original shipment.